China S6061-08-16-24 Standard Damper Actuator (Non Fail-Safe Damper Actuators) Manufacturer and Supplier

Features of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Torque 08-16-24NM
2 or 3 points control or Modulating
Actuator and damper shaft are bolt-on by screw.
Maximum round shaft φ16 and square shaft 12*12mm.
Direction of rotation can be setting.
Manual Override
With 2 auxiliary switches are optional
Power supply AC/DC 24V or AC 230V

Technical Datasheet of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

Item	Unit位	S6061-08DN(F)	S6061-16DN(F)	S6061-24DN/(F)
Torque	Nm	8	16	24
Damper area	m²	2	4	6
Running time	sec	30~40	72~88	117~143
Power supply	V	24VAC/DC；220VAC；110VAC
Frequency	Hz	50/60Hz 7.5W 50/60Hz
Running consumption	W	3.9W（24V）；4.8W（230V）
Maintaining consumption	W	0.4W（24V）；1.2W（230V）
Weight	Kg	1.25
Control signal		2/3 point
Position signal		2 auxiliary switches
Rotation angle		0~90º（max 93°）
Limited angle		5～85º（per step 5º）
Auxiliary switch rating		3（1.5）Amp 250V
Life cycle		>70000 cycles
Noise level		45dB(A)
Electrical level		Ⅱ
Protection level		IP44 or IP54
Ambient Temperature		-20~+50℃
Ambient Humidity		5~95%RH
Storage temperature		-40~+70℃
Certification		CE UL（Except 230V）

Wiring Diagram of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

The damper actuator can be controlled by 2 or 3 point.

s6061-08-24-standard-damper-actuator-non-fail-safe-damper-actuators-2

Auxiliary Switch of S6061-08~24 Standard Damper Actuator (Non Fail-Safe Damper Actuators)

There are 2 auxiliary switches of the actuator, and you can set the angle 0-90° (the factory sets a is 10° and b is 80°). It will output a on/off signal when the actuator rotates the setting angle.

s6061-08-24-standard-damper-actuator-non-fail-safe-damper-actuators-3