S6062-05/10 Series Electric Control Actuator

Siffofin S6062-05/10 Series Electric Control Actuator

• Simintin gyare-gyaren aluminum, ƙarar haske, mai sauƙi don sufuri da sakawa.
• Motar mai jujjuyawar aiki tare, kamawar hysteresis yana raba shingen fitarwa na motar da ɓangaren tuƙi lokacin da aka isa iyakataccen matsayi, sannan kare motar.
• Babban daidaito, saurin amsawa, wadatar da siginar amsawar matsayin bawul.
• Daidaitaccen aikin kulawa da hannu.

Takardar bayanan fasaha na S6062-05/10 Jerin Mai sarrafa Lantarki

Lura: Haɗin mai kunnawa ta haɗin gwiwar PG bayan an samo shi, ƙimar kariya na iya zama IP42.

PCB Zane na S6062-05/10 Series Electric Control Actuator

Bayanin Ayyukan LED na S6062-05/10 Series Electric Control Actuator

Lura: Nunin wutar lantarki LED1 ba shi da iko da shirin kuma yana haskakawa lokacin da babban wutar ke kunne.

Zane-zane na Waya Lantarki na S6062-05/10 Jerin Mai sarrafa Wutar Lantarki

Bayanin Aiki na S6062-05/10 Series Electric Control Actuator

1. Tsarin aiki:

• Haɗa motar zuwa jikin bawul.
• Haɗa wutar lantarki da wayoyi na sigina.
• Dangane da yanayin aikace-aikacen, an saita maɓallin DIP akan allon zuwa matsayi mai dacewa.(Dubi umarnin saitin don cikakkun bayanai)
• Kunna wutar lantarki, kunna wutar lantarki, daidaitaccen alamar LED na direba ya kamata a kunna, danna maɓallin "ja" auto-tuning na kusan daƙiƙa 3 don yin daidaitawar bawul ɗin bugun jini (duba umarnin kunna kai don kunnawa). cikakkun bayanai), Turin lantarki da jikin bawul Bayan an kammala aikin daidaitawa ta atomatik, injin ɗin yana shiga aiki na yau da kullun kuma zai yi aiki bisa ga siginar sarrafawa na yanzu.
• Kar a cire haɗin wutar lantarki kuma yi wasu ayyuka yayin aikin kunnawa ta atomatik.

2. Gabatar da siginar martani na bawul:

Direba na iya samar da siginar martani na bawul na ainihi zuwa waje.Jagoran siginar amsawa yana canzawa koyaushe yana dacewa da yanayin canjin siginar sarrafawa.Za'a iya saita nau'in siginar amsa ta hanyar maɓallin DIP akan allon kewayawa.

3. Aikin hannu:

• Bude murfin saman
• Cire haɗin wutar lantarki kuma mai nuna wutar ya kamata a kashe.
• Saka maƙarƙashiya na musamman da aka kawo zuwa saman sandar hannu
• Dangane da bayanin siliki na murfin na sama, kunna kullun, jujjuya agogon agogo, sandar za ta gudu zuwa sama;juya agogo baya, sandar za ta yi gudu zuwa ƙasa.
• Bayan an gama aikin da hannu, cire maƙallan hannu, sake saita matsewar roba, kunna wutar lantarki, sannan shigar da yanayin lantarki.
• Lokacin da ba a amfani da maƙallan musamman, da fatan za a saka shi a cikin ramin murfin saman kuma danna maƙallan ƙasa don gyara shi don guje wa asara.Da zarar an rasa maƙallan hannu, ana iya sarrafa shi ta amfani da madaidaicin maɓallin Allen 6mm.

Misalin Siginar Sarrafa Gabaɗaya na S6062-05/10 Jerin Mai sarrafa Wutar Lantarki

Siffar Tsarin Gyaran Kai na S6062-05/10 Jerin Mai sarrafa Lantarki

• A cikin yanayin da ba na kunna kai ba, latsa ka riƙe maɓallin S1 a kusurwar dama ta sama don kusan agogon 3S don shigar da aikin daidaitawa ta atomatik (lokacin da alamun saiti huɗu LED2-LED5 ke kashe, maɓallin S1 na iya sakewa. ).A cikin lokaci na daidaitawa na 1, LED2-LED5 ya ƙare gaba ɗaya, alamar "RUN" tana walƙiya kore da sauri, kuma mai kunnawa yana gudana zuwa ƙananan iyaka.Bayan mai kunnawa ya tsaya na kusan dakika 10, sannan sai a aiwatar da kashi na biyu, LED2-LED5 ya mutu gaba daya, alamar “RUN” tana haskakawa da sauri, kuma mai kunnawa yana gudana har zuwa matsayi na sama.
• Shirin ya yi la'akari da cewa bayanan tsarin daidaitawa na al'ada ne, kuma ya fita daga tsarin daidaitawa.Manufofin saiti guda huɗu LED2-LED5 sun koma yanayin al'ada, kuma direban ya shiga yanayin aiki ta atomatik.
• Shirin ya yi hukunci cewa bayanan da ke cikin tsarin daidaitawa ba su da kyau kuma suna haskaka alamar kuskure.A wannan lokacin, ana iya sake saita shi ta hanyar sake kunnawa.Yi ƙoƙarin sake kunna tsarin daidaitawa ta atomatik.Idan har yanzu bai ƙare ba bisa ka'ida, da fatan za a tuntuɓi mai fasaha don magance matsala.

Yanayin atomatik na S6062-05/10 Series Electric Control Actuator

• Manufofin saitin 4 LED2-LED5 suna nuna babban matsayi na yanzu
• Alamar RUN tana nuna jagorar tafiyar yanzu
• Terminal Y yana fitar da siginar matsayi na ainihi

Yanayin Manual na S6062-05/10 Series Electric Control Actuator

• Za'a iya saita lambobi 5 na lambar bugun kira na actuator S2 zuwa ON, kuma ana canza ikon sarrafawa.Alamar saitin LED5 tana juya kore.A wannan lokacin, bisa ga matsayin 6th bit na lambar bugun kiran S2, zai gudana zuwa ON da sama.Alamar “RUN” zata yi ja.Lokacin da aka kashe, zai gudu zuwa ƙasa.Alamar "RUN" za ta yi haske kore kuma motar za ta yi tafiya zuwa iyakar matsayi., jinkirta kashe wuta don dakatar da motar.
• Fita yanayin jagora, zaku iya saita lambobi 5 na bugun kira na actuator S2 zuwa KASHE, canza zuwa sarrafawa ta atomatik, sannan saita alamar LED5 zuwa ja.